Operations

ON/OFF
In unlocked status, press and hold the side switch for 0.5 seconds to turn on/off the headlight.
Press and hold the tail switch for 0.5 seconds to turn on/off the tail light.

Output Selection
Headlight: When the headlight is on, single click the side switch to cycle through Low→Med→High→Turbo.
Tail light: When the tail light is on, single click the tail switch to cycle through White light→Red light→Red flash→Red SOS.

Strobe
In unlocked status, press and hold the tail switch for 1.5 seconds to activate Strobe. Single click the side switch once again, the light will return to General brightness.

Lock-out Function
Lock: When the headlight is off and unlocked, double click the side switch; the light will blink at Med twice, indicating the headlight is locked.
Unlock: When the headlight is off and locked, double click the side switch, the light will be unlocked and turned on the last used output level.

Note: In locked status, the light only responds to unlocking operation; single click the side switch, the headlight will blink twice to remind the light is under locked status.

Intelligent Memory Circuit
The headlight memorizes the last brightness level used in the General mode. The next time it is turned on, it will recall the previously used General brightness level.
The tail light is defaulted on White light each time it is turned on again.

Intelligent Overheat Protection
The light will accumulate a lot of heat when used at Turbo output level for extended periods. When the light reaches a temperature of 65℃ or above, the light will automatically step down by a few lumens to reduce temperature. When the temperature is reduced, the output will gradually return to Turbo output level.

Low-voltage Downshift Function
When the voltage level drops below the preset level in working condition, the flashlight will start downshifting to lower brightness levels until Low output is reached, in order to remind you to replace the batteries. To ensure normal use, the light will not turn off and will work until the over-discharge function stops the battery from working.