Fenix CL26R – 400 Lumens Rechargeable LED Lantern – Black

Operations

On/Off_x000D_Press and hold the switch for 0.5 seconds to turn on/off the lantern._x000D__x000D_Mode Switching_x000D_The white light mode is selected by default each time the lantern is turned on._x000D_In white light mode, doubleclick the switch to enter the red light mode, and then double click again to return to the white light mode._x000D__x000D_Output Selection_x000D_White light: Click the switch to cycle through Low→Med →High→Front→Down 1 →Down 2_x000D_Red light: Click the switchto cycle through Red light →Red Flash._x000D__x000D_Charging_x000D_Operation:With the lantern switched off,remove the dust cover to reveal the charging port, and plug the Micro USB end of the USB cable into the lantern’s charging port, then connect the other end of the USB cable to a USB power adaptor._x000D_Charging Indicator: The indicatorsnear the switch willdisplay charging status. Four indicators willremain constant on when the battery is fully charged._x000D__x000D_Note:_x000D_1. The normal charging time is about 2.5 hours from fully depleted to fully charged with the light off._x000D_2. Only Low output can be used while the light is being charged, but charging time will be prolonged._x000D__x000D_Battery Level Indication_x000D_With the light switched off, single click theswitch to check the battery status. The battery level indicators will display the battery status for 3 seconds._x000D_One light on: critical, 0% – 25%_x000D_Two lights on: poor, 26% – 50%_x000D_Three lights on: sufficient, 51% – 85%_x000D_Four lights on: saturated, 86% – 100%_x000D__x000D_Low-Voltage Warning_x000D_When the voltage level drops below the preset level, the first indicator flashes to remind you to recharge the battery. To ensure normal use, the lantern will not turn off automatically and will work till the battery level runs out._x000D__x000D_Usage and Maintenance_x000D_

_x000D_
• Disassembling the sealed head can cause damage to the lantern and will void the warranty.

_x000D_

• Fenix recommends using excellent-quality batteries.

_x000D_

• If the light will not be used for an extended period, remove the batteries or the lantern could be damaged by electrolyte leakage or battery explosion.

_x000D_

• Recharge the light timely when the battery level is critical, for future use.

_x000D_

• Recharge a stored light every three months to maintain optimal battery performance.

_x000D_

• Replace the dust cover when charging is complete to ensure waterproof and dustproof performance.

_x000D_

• Long-term use can result in O-ring wear. To maintain a proper water seal, replace the ring with an approved spare．

_x000D_

• Periodic cleaning of the battery contacts improves the lamp’s performance, as dirty contacts may cause the lamp to flicker, shine intermittently or even fail to illuminate for the following reasons:_x000D_A: The battery needs replacing._x000D_Solution: Replace battery (ensure battery is inserted according to the manufacturer’s specifications)._x000D_B: The threads, PCB board contact or other contacts are dirty._x000D_Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

_x000D_

_x000D_Warning_x000D_This camping lantern is a high-intensity lighting device capable of causing eye damage to the user or others. Avoid shining the camping lantern directly into anyone’s eyes.